Menu

DESOI Spiral Anchor System Anchor Plus W

More Informations
Filter
Filter
m_50215
SELECT DISTINCT shop_view_active_item.*
							FROM shop_item_has_category
							  INNER JOIN shop_view_active_item ON (
							    shop_view_active_item.company = shop_item_has_category.company AND 
							    shop_view_active_item.shop_code = shop_item_has_category.shop_code AND 
							    shop_view_active_item.language_code = shop_item_has_category.language_code AND 
                                    ( 
                                      shop_item_has_category.item_no = shop_view_active_item.item_no 
                                    )
							    )
							  
							  WHERE (shop_item_has_category.category_line_no = 139687)
							  AND shop_view_active_item.language_code = 'ENU'
							  AND shop_view_active_item.company = 'DESOI'
							  AND shop_view_active_item.shop_code = 'B2B'
							  AND shop_item_has_category.company = 'DESOI'
							  AND shop_item_has_category.shop_code = 'B2B'
							  AND shop_item_has_category.language_code = 'ENU'
							  AND shop_item_has_category.category_shop_code = 'B2B'
							 

DESOI Anchor Plus W

If the connection between facing and bearing wall of double leaf walls does not exist anymore or only in parts, the DESOI Spiral Anchor System Anchor Plus W is the ideal solution to additionally anchor the two wall leaves with each other. The system consists of the DESOI Anchor Plus W and the DESOI Spiral Anchor Mortar.

Nachträgliche Verankerung mit dem DESOI Spiralankersystem Anker Plus W

Additional anchoring with the
DESOI Spiral Anchor System Anchor Plus W

 open PDF
 

Objective of the tests carried out

  • Determination of reference values for on-site tests on spiral anchors mortar- embedded in masonry blocks, according to the technical rules of the DIBt
  • Determination of the load bearing capacity of the anchor system for use as additional anchoring of the facings of double-leaf walls
 
Information: As anchoring base solid building bricks (Mz) and solid lime-sand bricks (KS) were tested
Important findings by the MPA Stuttgart from the pull-out tests on DESOI Anchors Plus W

The characteristic bearing capacity of a single spiral anchor exposed to tensile stress is:
• relating to standardised compressive strength fb:
                NRk = 2,5 kN for building bricks Mz
                NRk = 1,5 kN for lime-sand bricks KS
• relating to the compressive strength ftest at the time of the test:
                NRk = 3,5 kN for building bricks Mz
                NRk = 2,5 kN for lime-sand bricks KS

Application instructions

The Anchor Plus W is screwed in the spiral anchor mortar. The twist of the spiral anchor increases the adhesive bond between the two components of the system. The thixotropic consistency of the spiral anchor mortar prevents leakage into voids. The DESOI Anchor Plus W of austenitic stainless steel (1.4301) has a nominal diameter of 8 mm and is available cut to lengths between 180 mm and 400 mm (steps of 20 mm)..

 

Advantages and benefits

  • Minimal penetration into the masonry
  • Can be used for nearly all types of masonry
  • Absorption of tensile and shearing forces

Interpretation and conclusions

  • The required bearing capacity of an individual spiral anchor exposed to tensile stress is safely exceeded compared to the standard of 1 kN each, even under unfavourable conditions as e. g. inadequate cleaning of the borehole, insufficient anchoring depth of the spiral anchor, etc. the anchors absorb a tensile load of at least 1 kN at a displacement of 1 mm
  • Maximum distance of the masonry leaves 150 mm
  • Installation of the Anchors Plus W:
                       minimum anchoring depth in building bricks = 102mm
                       minimum anchoring depth in lime-sand bricks = 95mm
 
The functional capability of the anchors is not tested at high or low temperatures, a reduced curing time, permanent loads, and under freeze-thaw conditions. These factors should be determined on the object or for the intended use by the person in charge.
 

Further Information

  • Professional opinion of the DESOI GmbH with technical advice and methods regarding the execution, compiled in cooperation with the “Ingenieurbüro für Bauwerkserhaltung Weimar GmbH”
  • Test report of the Materialprüfungsanstalt Universität Stuttgart (Prüfungsbericht 903 3888 000 of 22.03.2018)
Wir brauchen Ihr Einverständnis!
Wir benutzen Drittanbieter, um Videoinhalte einzubinden. Diese können persönliche Daten über Ihre Aktivitäten sammeln. Bitte beachten Sie die Details und geben Sie Ihre Einwilligung.

Mehr Informationen
Externe Medien Akzeptieren
scroll top